Home / Products / Metalbit
Metalbit
Noise-abating profiled metal roofing sheets

Metalbit roofing sheets are multi-layer products that combine profiled metal sheeting with bituminous membranes of different type in order to provide excellent noise abatement and anti-drum functions. Metalbit roofing sheets are available with either a metal foil internal liner, for highest noise abatement performance, or with a non-woven polyester lining, for applications where also condensation control is required.
Metalbit sheets are cost effective and versatile for use in roofing works where protection, durability, sound comfort and condensation control are required.
Metalbit roofing sheets are suitable for use in industrial, commercial and farming buildings and constructions.

Advantages
Noise abatement

METALBIT technology combines the durability of metal sheets with the exceptional sound-proofing and anti-drum features of bituminous membranes.

METALBIT roofing sheets are among the most performing metal roofing products and among the best performing roofing systems in general.

Condensation control

The METALBIT TESSUTO profiled metal sheets are designed with a a non-woven polyester mat at the lower side to provide an anti-dripping function in roofing applications where condensation control is required.

Aesthetic value

The facing material of the internal liner of METALBIT METALLICO roofing sheets is a natural embossed aluminium that provides good aesthetic value to the roof interior. Available with profiles 29 and 40.

Versatility of use and high degree of customisation

METALBIT products are suitable roofs with a minimum gradient of 7% (subject to local weather conditions and to local building regulations) and up to vertical. METALBIT roofing systems can be installed on supporting structures of different type including wooden decks, brick and mason works, concrete structures, or directly over wooden or metal purlins and rafters.

METALBIT roofing systems include a vast assortment of accessories and specialist fabrication parts that make this product range a complete and integrated roofing system.
METALBIT roofing sheets are suitable for use on a variety of roofing constructions: straight pitched, cusped, cranked, homogeneous and heterogenous surfaces. METALBIT roofing systems offer great versatility of use and include a vast array of accessories and specialist fabrication parts making this product range a complete and integrated roofing system.

Ease of installation

Available in modular sizes as well as in customized lengths for greater ease of installation. METALBIT roofing sheets allow for quick and intuitive installation, with consistent savings on labour compared to traditional roofing systems and with reduced margins for error during installation works.

Dry fitting

The METALBIT systems are all dry fitted, and require no use of concrete or adhesives. No curing time is required. Installation works are quick, intuitive and accurate. As a result, the construction site will remain cleaner and the building will become accessible upon completion of the roofing works, with considerable savings on hire of plant and equipment.

Lightweight

The METALBIT roofing elements weigh 8 times less than tradition clay tile roofing.

METALBIT sheets and panels are highly recommended for roof refurbishments in general and are most suited where supporting structures have a limited load-bearing capacity.

Reduction of seismic risks

The METALBIT range is ideal for use in areas subject to seismic risks and because of its lightweight structure and unique installation system, it allows to limit static loads on pillars and foundations.

Modular combinations

The METALBIT roofing sheets can be combined with various types of matching profiled insulation boards to meet the project thermal insulation requirements as set by the Architect and combining aesthetic value with static and thermal insulation performance.

The great versatility of use of Copernit panels make these products suitable for use on a variety of constructions even of very complex and heterogenous design.

Environmental sustainability

METABIL roofing sheets are made of natural, recoverable and recyclable materials, such as steel, aluminium or copper sheeting.

Accomplishments
Metalbit Metallico

Multi-layer profiled sheets that combine metal sheeting and a bituminous membrane with an embossed metal foil facing for an added aesthetic value. Metalbit Metallico sheets offer excellent noise-abatement and anti-drum values and are available with profiles 29 and 40.

Metalbit Tessuto

Multi-layer profiled sheets that combine metal sheeting and a bituminous membrane lined with a thick isotropic and rot-proof polyester mat. Metalbit Tessuto sheets are designed for use in roofing applications where effective condensation control is required in combination with a high noise-abatement and anti-drum performance.

Available with profiles 21, 29 and 40.

MAXI SHED NOTCH

α angle with 90° a 179° notching; short pitch min 100 mm.

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

CALENDERING MAXI SHED NOTCH

α angle with 90° a 179° notching; short pitch min 100 mm. Radius of curvature: 3,0 m min.

Available with 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

NOTCHING MAXI SHED NOTCH

α angle with 90° a 179° notching; short pitch min 100 mm. Radius of curvature: 0,7 m min. (0,4 m with 40 profile), with micro notches.

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

NOTCHING

Micro notches with min 0,7 m radius of curvature (0,4 m with 40 profile). At least one pitch must be 300 mm length and straight.

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

CALENDERING

Radius of curvature: 3,0 m min.

Available with 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

NOTCHING TOP

Micro notches with min 0,7 m radius of curvature (0,4 m with 40 profile). At least one pitch must be 300 mm length and straight.

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

MAXI NOTCH TOP

Maxi shed notch with bending α angle between 179° and 90°

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

STRAIGHT-CURVED-STRAIGHT CALENDERING

Radius of curvature: 3,0 m min. Final straight pitches with variable length.

Available with 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

CURVED-STRAIGHT CALENDERING

Radius of curvature: 3,0 m min. Final straight pitch with variable length.

Available with 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

STRAIGHT- NOTCHING

Micro notches with min 0,7 m radius of curvature (0,4 m with 40 profile). Final straight pitch min. 300 mm length.

Available with 21, 29, 40 profiles.

The feasibility of workings must always be checked with Copernit Technical Office, according to specific needs.

LS1 Straight hinged ridge
LS2 Hinged ridge
LS4 Fixed-angle under-ridge
LS5 Vented ridge
LS8 Snow catch
LS10 Large gutter
LS11 Wall Flashing
LS12 Ribbed Wall flashing
Curved end closure
Curved flashing
Specialist fabrications
Fasteners
PVC Bird screen
Wooden Rafters
Fasteners
Telescopic supports
Rafter-support bracket
Ondaflex foam
Glass wool
Fall protection wire mesh
Polycarbonate
Acrylic sheets