Home / Products / Coperall LG
Coperall LG
Profiled metal sheets

Coperall LG profiled metal sheets are lined on the lower face with a non woven polyester mat for a highly effective anti-dripping function. They are designed for use on roofs with a minimum gradient of 7% and are most suitable for applications where condensation control is of prime importance.
Available with profiles 21, 29, 33, 40 and 40R.

Coperall LG roofing sheets are recommended for use in industrial or agricultural constructions including breeding farms.

Advantages
Versatility of use and high degree of customization

COPERALL LG products are suitable roofs with a minimum pitch of 7% (subject to local weather conditions and to local building regulations) and up to vertical. COPERALL LG roofing systems can be installed on supporting structures of different type including wooden decks, brick and mason works, concrete structures, or directly over wooden or metal purlins and rafters.
COPERALL LG roofing systems include a vast assortment of accessories and specialist fabrication parts that make this product range a complete and integrated roofing system.
COPERALL LG roofing sheets are suitable for use in a variety of roofing constructions: straight pitched, cusped, cranked, homogeneous and heterogenous surfaces. COPERALL LG roofing systems offer great versatility of use and include a vast array of accessories and specialist fabrication parts making this product range a complete and integrated roofing system.

Ease of installation

Available in modular sizes as well as in customized lengths for greater ease of installation. COPERALL LG roofing sheets allow for quick and intuitive installation, with consistent savings compared to traditional roofing systems with reduced margins for error during installation works.

Dry fitting

The COPERALL LG systems are all dry fitted, and require no use of concrete or adhesives. No curing time is required. Installation works are quick, intuitive and accurate. As a result, the construction site will remain cleaner and the building will become accessible upon completion of the roofing works, with considerable savings on hire of plant and equipment.

Lightweight

COPERALL LG roofing systems are lightweight up to 10 times less than a traditional clay tile roofing and up to 30% less than a polymer-bitumen membrane roofing. COPERALL LG roofing systems are widely used for roof refurbishments in general and are most suited where supporting structures offer limited load-bearing capacity.

Condensation control

COPERALL-TNT metal sheets are designed for use on roofs with a minimum gradient of 7% . On the lower face they are lined with a non woven polyester mat and provide an effective anti-dripping function for applications where condensation control is required.

Reduction of seismic risks

The COPERALL LG range is ideal for use in areas subject to seismic risks and because of its lightweight structure and unique installation system, it allows to limit static loads on pillars and foundations.

Modular combinations

Copernit profiled metal sheets can be combined with various types of matching profiled insulation boards to meet the project thermal insulation requirements as set by the Architect, combining aesthetic value with static and thermal insulation performance. The great versatility of use of Copernit panels make these products suitable for use on a variety of constructions even of very complex and heterogenous design.

Reaction to fire

COPERALL metal sheets have an A1 (non flammable) fire rating. They are suitable for use on private or public buildings, where fire rated materials are required.

Cost effective roofing solutions

COPERALL LG plates have an excellent quality-price ratio and the cost effectiveness of these products is furthered by their great ease of installation.

Environmental sustainability

The COPERALL LG product range consists of natural, recoverable and recyclable materials, such as steel, aluminium and copper. At the end of the roof's useful life these materials become replaceable and recyclable and also an environmental-friendly economic resource.

Accomplishments
Coperall

Profiled metal sheets for roofing and cladding applications. Available with profiles 21, 29, 33, 40 and 40R.

Coperall TNT

Profiled metal sheets lined with a nonwoven polyester mat, designed for roofing and cladding applications where condensation control is required.

Available with profiles 21, 29, 33 and 40.

Maxi tacca shed

Angolo α con tacca da 90° a 179° e veletta shed min 100 mm.

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Maxi tacca shed calandrato

Angolo α con tacca da 90° a 179° e veletta shed min 100 mm. Raggio di curvatura min 3,0 m.

Disponibile su Coperall e Coperall-TNT per i profili 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Maxi tacca shed tacchettato

Angolo α con tacca da 90° a 179°, veletta shed min 100 mm e raggio di curvatura min 0,7 m, con microtacche.

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Tacchettato

Microtacche con raggio di curvatura min 0,7 m. Almeno una estremità avrà sempre un passo minimo di 300 mm e sarà retta.

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Calandrato

Raggio di curvatura min 3,0 m.

Disponibile su Coperall e Coperall-TNT per i profili 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Colmo tacchettato

Microtacche con raggio di curvatura min 0,7 m. Almeno una estremità avrà sempre un passo minimo di 300 mm e sarà retta.

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Colmo maxi tacca

Maxi tacca con angolo α di piegatura da 179° a 90°

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Calandrato retto-curvo-retto

Raggio di curvatura minimo 3,0 m, parti terminali rette lunghezze variabili.

Disponibile su Coperall e Coperall-TNT per i profili 29, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Calandrato curvo-retto

Raggio di curvatura minimo 3,0 m, parte terminale retta lunghezza variabile.

Disponibile su Coperall e Coperall-TNT per i profili 29, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
Tacchettato - retto

Microtacche con raggio di curvatura min 0,7 m. Parte retta terminale con passo min di 300 mm.

Disponibile su Coperall e Coperall-TNT per i profili 21, 29, 33, 40

La fattibilità delle lavorazioni va sempre verificata con l’Ufficio Tecnico Copernit, in funzione delle esigenze specifiche.
LS1 Straight hinged ridge
LS2 Hinged ridge
LS4 Fixed-angle under-ridge
LS5 Vented ridge
LS8 Snow catch
LS10 Large gutter
LS11 Wall Flashing
LS12 Ribbed Wall flashing
Curved end closure
Curved flashing
Specialist fabrications
Fasteners
PVC Bird screen
Wooden Rafters
Fasteners
Telescopic supports
Rafter-support bracket
Ondaflex foam
Glass wool
Fall protection wire mesh
Polycarbonate
Acrylic sheets